Analysis and treatment of the fracture of the saw blade of the bone saw machine. What are the main reasons for the fracture?
First of all, let me introduce myself. I am Haozailai Knife Saw in Zhejiang, China. We are the largest source factory of saw blades for bone sawing machines in China. Mainly engaged in wholesale and retail saw blades for bone sawing machines. Today, I would like to share some common knowledge here, hoping to help everyone. There are many reasons for breakage in the use of saw blades in bone sawing machines. Today, we mainly classify them into four points: the first is the process (firmness of the saw blade welding joint), the second is the material, the third is installation, and the fourth is operation. By paying attention to these points, we can reduce the occurrence of fractures.
Next, let me introduce the methods for extending the lifespan of saw blades:
1. The black tooth tip on the saw blade should be 1.5mm above the edge of the wheel, and the tooth tip should not be scratched on the wheel disc
2. After installing the saw blade on the machine and adjusting its tightness, loosen it by 1 and a half turns
3. When the saw blade is not in use, loosen it by 2 turns to restore the tension of the saw blade to a relaxed state, and then tighten it again when in use
4. During the saw blade cutting operation, pay attention to the speed and push it in at a uniform speed to avoid rough operation.
5. Two saw blades are replaced, and one is replaced back and forth in 40 minutes. The saw blade is prone to fatigue and tension is not restored in a timely manner when working for a long time. The service life of the saw blade is even longer when replacing two saw blades
6. Check the white saw blade, bearings, and guide device on the machine for any wear or abnormal noise
7. The bone saw machine regularly cleans bone debris, making the saw blade more durable and less prone to breakage
china Yongkang Haozailai Knife Saw Co., Ltd
——Strict on every serration
Our main care has always been to improve the quality of our products, so now we can certainly state that, after receiving several appreciations in home and foreign markets, at present our band saw blades, have no competitors.
This has been possible thanks to the very good quality of the used stainless, to special hardening treatments and to the very accurate finishing.
Each single piece of our production guarantee a very long lifetime, very good cutting efficienty and very high operating perfection.
Therefore, we trust will prefer our products.
Now we are looking for 1-2 distributors in your country.
Please contact us for free samples, and let's walk hand in hand to get great success.
Request a Quote
